dmesg - LOGICAL VOLUME - Intel Xeon E5-2670 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-514.16.1.el7.x86_64 (mockbuild@x86-ol7-builder-02) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) ) #1 SMP Wed Apr 12 10:03:19 PDT 2017
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-514.16.1.el7.x86_64 root=/dev/mapper/ol-root ro crashkernel=auto rd.lvm.lv=ol/root rd.lvm.lv=ol/swap rhgb quiet LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bddabfff] usable
BIOS-e820: [mem 0x00000000bddac000-0x00000000bddddfff] ACPI data
BIOS-e820: [mem 0x00000000bddde000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000243fffefff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: HP ProLiant DL360p Gen8, BIOS P71 07/01/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x243ffff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000C0000000 mask 3FFFC0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbddac max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x01f9f000, 0x01f9ffff] PGTABLE
BRK [0x01fa0000, 0x01fa0fff] PGTABLE
BRK [0x01fa1000, 0x01fa1fff] PGTABLE
BRK [0x01fa2000, 0x01fa2fff] PGTABLE
BRK [0x01fa3000, 0x01fa3fff] PGTABLE
RAMDISK: [mem 0x3467c000-0x36335fff]
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000bddaed00 000E4 (v01 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: FACP 00000000bddaee40 000F4 (v03 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20130517/tbfadt-668)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20130517/tbfadt-668)
ACPI: DSDT 00000000bddaef40 026DC (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000bddac140 00040
ACPI: SPCR 00000000bddac180 00050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E)
ACPI: MCFG 00000000bddac200 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000bddac240 00038 (v01 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: FFFF 00000000bddac280 00064 (v02 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: SPMI 00000000bddac300 00040 (v05 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: ERST 00000000bddac340 00230 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: APIC 00000000bddac580 0026A (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 00000000bddac800 00750 (v01 HP Proliant 00000001 \xffffffd2? 0000162E)
ACPI: FFFF 00000000bddacf80 00176 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: BERT 00000000bddad100 00030 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: HEST 00000000bddad140 000BC (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: DMAR 00000000bddad200 004E0 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: FFFF 00000000bddaec40 00030 (v01 HP ProLiant 00000001 00000000)
ACPI: PCCT 00000000bddaec80 0006E (v01 HP Proliant 00000001 PH 0000504D)
ACPI: SSDT 00000000bddb1640 007EA (v01 HP DEV_PCI1 00000001 INTL 20120503)
ACPI: SSDT 00000000bddb1e40 00103 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000bddb1f80 00098 (v03 HP CRSPCI1 00000002 HP 00000001)
ACPI: SSDT 00000000bddb2040 0038A (v02 HP riser0 00000002 INTL 20030228)
ACPI: SSDT 00000000bddb2400 00385 (v03 HP riser1a 00000002 INTL 20030228)
ACPI: SSDT 00000000bddb27c0 00BB9 (v01 HP pcc 00000001 INTL 20120503)
ACPI: SSDT 00000000bddb3380 00377 (v01 HP pmab 00000001 INTL 20120503)
ACPI: SSDT 00000000bddb3700 05524 (v01 HP pcc2 00000001 INTL 20120503)
ACPI: SSDT 00000000bddb8c40 04E84 (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x2b -> Node 1
SRAT: PXM 1 -> APIC 0x2c -> Node 1
SRAT: PXM 1 -> APIC 0x2d -> Node 1
SRAT: PXM 1 -> APIC 0x2e -> Node 1
SRAT: PXM 1 -> APIC 0x2f -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00000000-0x123fffffff]
SRAT: Node 1 PXM 1 [mem 0x1240000000-0x243fffffff]
Initmem setup node 0 [mem 0x00000000-0x123fffffff]
NODE_DATA [mem 0x123ffd9000-0x123fffffff]
Initmem setup node 1 [mem 0x1240000000-0x243fffefff]
NODE_DATA [mem 0x243ffd8000-0x243fffefff]
Reserving 169MB of memory at 656MB for crashkernel (System RAM: 147421MB)
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x243fffefff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbddabfff]
node 0: [mem 0x100000000-0x123fffffff]
node 1: [mem 0x1240000000-0x243fffefff]
On node 0 totalpages: 18865480
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12087 pages used for memmap
DMA32 zone: 773548 pages, LIFO batch:31
Normal zone: 282624 pages used for memmap
Normal zone: 18087936 pages, LIFO batch:31
On node 1 totalpages: 18874367
Normal zone: 294912 pages used for memmap
Normal zone: 18874367 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x28] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x29] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2f] enabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x00] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 0, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec40000] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 64 CPUs, 32 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbddac000-0xbddddfff]
PM: Registered nosave memory: [mem 0xbddde000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]
PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:2
PERCPU: Embedded 33 pages/cpu @ffff8811f7600000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 16 17 18 19 20 21 22 23
pcpu-alloc: [0] 32 34 36 38 40 42 44 46 [0] 48 50 52 54 56 58 60 62
pcpu-alloc: [1] 08 09 10 11 12 13 14 15 [1] 24 25 26 27 28 29 30 31
pcpu-alloc: [1] 33 35 37 39 41 43 45 47 [1] 49 51 53 55 57 59 61 63
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 37150139
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-514.16.1.el7.x86_64 root=/dev/mapper/ol-root ro crashkernel=auto rd.lvm.lv=ol/root rd.lvm.lv=ol/swap rhgb quiet LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 7020336k/152043516k available (6766k kernel code, 1084128k absent, 2653120k reserved, 4430k data, 1684k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=2
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=64.
NR_IRQS:327936 nr_irqs:1752 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 603979776 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2593.699 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.39 BogoMIPS (lpj=2593699)
pid_max: default: 65536 minimum: 512
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 33554432 (order: 16, 268435456 bytes)
Inode-cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 25812 entries in 101 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: APIC(20) Converting physical 1 to logical package 1
smpboot: Max logical packages: 8
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbefe000 flags: 0x0
DMAR: dmar0: reg_base_addr fbefe000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: DRHD base: 0x000000f4ffe000 flags: 0x1
DMAR: dmar1: reg_base_addr f4ffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x000000bdffd000 end: 0x000000bdffffff
DMAR: RMRR base: 0x000000bdff6000 end: 0x000000bdffcfff
DMAR: RMRR base: 0x000000bdf83000 end: 0x000000bdf84fff
DMAR: RMRR base: 0x000000bdf7f000 end: 0x000000bdf82fff
DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
DMAR: RMRR base: 0x000000bdf6e000 end: 0x000000bdf6efff
DMAR: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
DMAR: RMRR base: 0x000000bddde000 end: 0x000000bdddefff
DMAR: ATSR flags: 0x0
DMAR-IR: IOAPIC id 10 under DRHD base 0xfbefe000 IOMMU 0
DMAR-IR: IOAPIC id 8 under DRHD base 0xf4ffe000 IOMMU 1
DMAR-IR: IOAPIC id 0 under DRHD base 0xf4ffe000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xf4ffe000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
IRQ remapping doesn't support X2APIC mode, disable x2apic.
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
smpboot: Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 OK
smpboot: Booting Node 0, Processors #16 #17 #18 #19 #20 #21 #22 #23 OK
smpboot: Booting Node 1, Processors #24 #25 #26 #27 #28 #29 #30 #31
Brought up 32 CPUs
smpboot: Total of 32 processors activated (166449.66 BogoMIPS)
node 0 initialised, 17267556 pages in 445ms
node 1 initialised, 18053927 pages in 467ms
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL360 detected, enabling pci=bfsort.
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant []
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-1f]
pci_bus 0000:00: root bus resource [mem 0xf4000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [io 0x1000-0x7fff window]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: [8086:3c05] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [8086:3c06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [8086:3c07] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: [8086:3c09] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: [8086:3c0b] type 01 class 0x060400
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xf6cf0000-0xf6cf3fff 64bit]
pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xf6ce0000-0xf6ce3fff 64bit]
pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xf6cd0000-0xf6cd3fff 64bit]
pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xf6cc0000-0xf6cc3fff 64bit]
pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xf6cb0000-0xf6cb3fff 64bit]
pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xf6ca0000-0xf6ca3fff 64bit]
pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xf6c90000-0xf6c93fff 64bit]
pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xf6c80000-0xf6c83fff 64bit]
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xf6c70000-0xf6c70fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf6c60000-0xf6c603ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf6c50000-0xf6c503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:01.0: PCI bridge to [bus 04]
pci 0000:00:01.1: PCI bridge to [bus 11]
pci 0000:03:00.0: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf6bf0000-0xf6bfffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xf6be0000-0xf6beffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf6bd0000-0xf6bdffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xf6bc0000-0xf6bcffff 64bit pref]
pci 0000:03:00.1: reg 0x18: [mem 0xf6bb0000-0xf6bbffff 64bit pref]
pci 0000:03:00.1: reg 0x20: [mem 0xf6ba0000-0xf6baffff 64bit pref]
pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.2: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.2: reg 0x10: [mem 0xf6b90000-0xf6b9ffff 64bit pref]
pci 0000:03:00.2: reg 0x18: [mem 0xf6b80000-0xf6b8ffff 64bit pref]
pci 0000:03:00.2: reg 0x20: [mem 0xf6b70000-0xf6b7ffff 64bit pref]
pci 0000:03:00.2: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.2: PME# supported from D0 D3hot D3cold
pci 0000:03:00.3: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.3: reg 0x10: [mem 0xf6b60000-0xf6b6ffff 64bit pref]
pci 0000:03:00.3: reg 0x18: [mem 0xf6b50000-0xf6b5ffff 64bit pref]
pci 0000:03:00.3: reg 0x20: [mem 0xf6b40000-0xf6b4ffff 64bit pref]
pci 0000:03:00.3: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [mem 0xf6b00000-0xf6bfffff 64bit pref]
pci 0000:00:02.1: PCI bridge to [bus 12]
pci 0000:02:00.0: [103c:323b] type 00 class 0x010400
pci 0000:02:00.0: reg 0x10: [mem 0xf7f00000-0xf7ffffff 64bit]
pci 0000:02:00.0: reg 0x18: [mem 0xf7ef0000-0xf7ef03ff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0x5000-0x50ff]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xf7e00000-0xf7ffffff]
pci 0000:00:02.3: PCI bridge to [bus 13]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.1: PCI bridge to [bus 14]
pci 0000:00:03.2: PCI bridge to [bus 15]
pci 0000:00:03.3: PCI bridge to [bus 16]
pci 0000:00:11.0: PCI bridge to [bus 18]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:01:00.0: [103c:3306] type 00 class 0x088000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x14: [mem 0xf7df0000-0xf7df01ff]
pci 0000:01:00.0: reg 0x18: [io 0x3400-0x34ff]
pci 0000:01:00.1: [102b:0533] type 00 class 0x030000
pci 0000:01:00.1: reg 0x10: [mem 0xf5000000-0xf5ffffff pref]
pci 0000:01:00.1: reg 0x14: [mem 0xf7de0000-0xf7de3fff]
pci 0000:01:00.1: reg 0x18: [mem 0xf7000000-0xf77fffff]
pci 0000:01:00.2: [103c:3307] type 00 class 0x088000
pci 0000:01:00.2: reg 0x10: [io 0x3800-0x38ff]
pci 0000:01:00.2: reg 0x14: [mem 0xf6ff0000-0xf6ff00ff]
pci 0000:01:00.2: reg 0x18: [mem 0xf6e00000-0xf6efffff]
pci 0000:01:00.2: reg 0x1c: [mem 0xf6d80000-0xf6dfffff]
pci 0000:01:00.2: reg 0x20: [mem 0xf6d70000-0xf6d77fff]
pci 0000:01:00.2: reg 0x24: [mem 0xf6d60000-0xf6d67fff]
pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300
pci 0000:01:00.4: reg 0x20: [io 0x3c00-0x3c1f]
pci 0000:00:1c.7: PCI bridge to [bus 01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xf6d00000-0xf7dfffff]
pci 0000:00:1c.7: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 17] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 20-3f])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:01: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:01: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:01: _OSC: platform willing to grant []
acpi PNP0A08:01: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:20
pci_bus 0000:20: root bus resource [bus 20-3f]
pci_bus 0000:20: root bus resource [mem 0xf8000000-0xfbffffff window]
pci_bus 0000:20: root bus resource [io 0x8000-0xffff window]
pci 0000:20:00.0: [8086:3c01] type 01 class 0x060400
pci 0000:20:00.0: PME# supported from D0 D3hot D3cold
pci 0000:20:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:20:01.0: PME# supported from D0 D3hot D3cold
pci 0000:20:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:20:01.1: PME# supported from D0 D3hot D3cold
pci 0000:20:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:20:02.0: PME# supported from D0 D3hot D3cold
pci 0000:20:02.1: [8086:3c05] type 01 class 0x060400
pci 0000:20:02.1: PME# supported from D0 D3hot D3cold
pci 0000:20:02.2: [8086:3c06] type 01 class 0x060400
pci 0000:20:02.2: PME# supported from D0 D3hot D3cold
pci 0000:20:02.3: [8086:3c07] type 01 class 0x060400
pci 0000:20:02.3: PME# supported from D0 D3hot D3cold
pci 0000:20:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:20:03.0: PME# supported from D0 D3hot D3cold
pci 0000:20:03.1: [8086:3c09] type 01 class 0x060400
pci 0000:20:03.1: PME# supported from D0 D3hot D3cold
pci 0000:20:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:20:03.2: PME# supported from D0 D3hot D3cold
pci 0000:20:03.3: [8086:3c0b] type 01 class 0x060400
pci 0000:20:03.3: PME# supported from D0 D3hot D3cold
pci 0000:20:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:20:04.0: reg 0x10: [mem 0xfbff0000-0xfbff3fff 64bit]
pci 0000:20:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:20:04.1: reg 0x10: [mem 0xfbfe0000-0xfbfe3fff 64bit]
pci 0000:20:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:20:04.2: reg 0x10: [mem 0xfbfd0000-0xfbfd3fff 64bit]
pci 0000:20:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:20:04.3: reg 0x10: [mem 0xfbfc0000-0xfbfc3fff 64bit]
pci 0000:20:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:20:04.4: reg 0x10: [mem 0xfbfb0000-0xfbfb3fff 64bit]
pci 0000:20:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:20:04.5: reg 0x10: [mem 0xfbfa0000-0xfbfa3fff 64bit]
pci 0000:20:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:20:04.6: reg 0x10: [mem 0xfbf90000-0xfbf93fff 64bit]
pci 0000:20:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:20:04.7: reg 0x10: [mem 0xfbf80000-0xfbf83fff 64bit]
pci 0000:20:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:20:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:20:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:20:05.4: reg 0x10: [mem 0xfbf70000-0xfbf70fff]
pci 0000:20:00.0: PCI bridge to [bus 2b]
pci 0000:20:01.0: PCI bridge to [bus 21]
pci 0000:20:01.1: PCI bridge to [bus 22]
pci 0000:20:02.0: PCI bridge to [bus 23]
pci 0000:20:02.1: PCI bridge to [bus 24]
pci 0000:20:02.2: PCI bridge to [bus 25]
pci 0000:20:02.3: PCI bridge to [bus 26]
pci 0000:20:03.0: PCI bridge to [bus 27]
pci 0000:20:03.1: PCI bridge to [bus 28]
pci 0000:20:03.2: PCI bridge to [bus 29]
pci 0000:20:03.3: PCI bridge to [bus 2a]
pci_bus 0000:20: on NUMA node 1
vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.1
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 1f
PCI: root bus 1f: using default resources
PCI: Probing PCI hardware (bus 1f)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:1f
pci_bus 0000:1f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:1f: root bus resource [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:1f: No busn resource found for root bus, will use [bus 1f-ff]
pci_bus 0000:1f: busn_res: can not insert [bus 1f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
pci 0000:1f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:1f:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:1f:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:1f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:1f:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:1f:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:1f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:1f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:1f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:1f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:1f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:1f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:1f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:1f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:1f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:1f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:1f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:1f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:1f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:1f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:1f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:1f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:1f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:1f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:1f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:1f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:1f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:1f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:1f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:1f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:1f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:1f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:1f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:1f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:1f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:1f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:1f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:1f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:1f: busn_res: [bus 1f-ff] end is updated to 1f
pci_bus 0000:1f: busn_res: can not insert [bus 1f] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 20-3f])
pci 0000:3f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:3f:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:3f:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:3f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:3f:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:3f:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:3f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:3f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:3f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:3f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:3f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:3f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:3f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:3f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:3f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:3f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:3f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:3f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:3f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:3f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:3f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:3f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:3f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:3f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:3f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:3f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:3f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:3f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:3f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:3f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:3f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:3f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:3f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:3f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:3f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:3f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:3f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:3f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 20-3f])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbddac000-0xbfffffff]
e820: reserve RAM buffer [mem 0x243ffff000-0x243fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf4ffe000-0xf4ffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0310-0x0315] has been reserved
system 00:01: [io 0x0316-0x0317] has been reserved
system 00:01: [io 0x0700-0x071f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0cd0-0x0cd3] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfc000000-0xfc000fff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed30000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
system 00:06: [mem 0xfbefe000-0xfbefffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: BAR 14: assigned [mem 0xf4000000-0xf40fffff]
pci 0000:00:01.0: PCI bridge to [bus 04]
pci 0000:00:01.1: PCI bridge to [bus 11]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf4000000-0xf403ffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0xf4040000-0xf407ffff pref]
pci 0000:03:00.2: BAR 6: assigned [mem 0xf4080000-0xf40bffff pref]
pci 0000:03:00.3: BAR 6: assigned [mem 0xf40c0000-0xf40fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:00:02.0: bridge window [mem 0xf6b00000-0xf6bfffff 64bit pref]
pci 0000:00:02.1: PCI bridge to [bus 12]
pci 0000:02:00.0: BAR 6: assigned [mem 0xf7e00000-0xf7e7ffff pref]
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xf7e00000-0xf7ffffff]
pci 0000:00:02.3: PCI bridge to [bus 13]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.1: PCI bridge to [bus 14]
pci 0000:00:03.2: PCI bridge to [bus 15]
pci 0000:00:03.3: PCI bridge to [bus 16]
pci 0000:00:11.0: PCI bridge to [bus 18]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:01:00.2: BAR 6: assigned [mem 0xf6d00000-0xf6d0ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xf6d00000-0xf7dfffff]
pci 0000:00:1c.7: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 17]
pci_bus 0000:00: resource 4 [mem 0xf4000000-0xf7ffffff window]
pci_bus 0000:00: resource 5 [io 0x1000-0x7fff window]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window]
pci_bus 0000:00: resource 9 [io 0x03b0-0x03bb window]
pci_bus 0000:00: resource 10 [io 0x03c0-0x03df window]
pci_bus 0000:00: resource 11 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf40fffff]
pci_bus 0000:03: resource 2 [mem 0xf6b00000-0xf6bfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf6d00000-0xf7dfffff]
pci_bus 0000:01: resource 2 [mem 0xf5000000-0xf5ffffff 64bit pref]
pci_bus 0000:17: resource 4 [mem 0xf4000000-0xf7ffffff window]
pci_bus 0000:17: resource 5 [io 0x1000-0x7fff window]
pci_bus 0000:17: resource 6 [io 0x0000-0x03af window]
pci_bus 0000:17: resource 7 [io 0x03e0-0x0cf7 window]
pci_bus 0000:17: resource 8 [io 0x0d00-0x0fff window]
pci_bus 0000:17: resource 9 [io 0x03b0-0x03bb window]
pci_bus 0000:17: resource 10 [io 0x03c0-0x03df window]
pci_bus 0000:17: resource 11 [mem 0x000a0000-0x000bffff window]
pci 0000:20:00.0: PCI bridge to [bus 2b]
pci 0000:20:01.0: PCI bridge to [bus 21]
pci 0000:20:01.1: PCI bridge to [bus 22]
pci 0000:20:02.0: PCI bridge to [bus 23]
pci 0000:20:02.1: PCI bridge to [bus 24]
pci 0000:20:02.2: PCI bridge to [bus 25]
pci 0000:20:02.3: PCI bridge to [bus 26]
pci 0000:20:03.0: PCI bridge to [bus 27]
pci 0000:20:03.1: PCI bridge to [bus 28]
pci 0000:20:03.2: PCI bridge to [bus 29]
pci 0000:20:03.3: PCI bridge to [bus 2a]
pci_bus 0000:20: resource 4 [mem 0xf8000000-0xfbffffff window]
pci_bus 0000:20: resource 5 [io 0x8000-0xffff window]
pci_bus 0000:1f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:1f: resource 5 [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0x3fffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:01:00.1: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 29416k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9dac000-0xbddac000] (64MB) mapped at [ffff8800b9dac000-ffff8800bddabfff]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
sha1_ssse3: Using AVX optimized SHA-1 implementation
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 16384 (order: 8, 1048576 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1492673052.401:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ioapic: probe of 0000:00:05.4 failed with error -22
ioapic: probe of 0000:20:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 21, io mem 0xf6c60000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-514.16.1.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 20, io mem 0xf6c50000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-514.16.1.el7.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:00.4: detected 8 ports
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-514.16.1.el7.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:01:00.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU16 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU17 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU18 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU19 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU20 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU21 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU22 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU23 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU24 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU25 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU26 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU27 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU28 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU29 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU30 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU31 sig=0x206d7, pf=0x1, revision=0x710
microcode: Microcode Update Driver: v2.01 , Peter Oruba
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Oracle Linux RHCK Module Signing Key: dd995b155c19b3a7c3ef7707b969e25f9639666e'
Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80'
Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8'
Loaded X.509 cert 'Oracle CA Server: f55faa6db16fb25d44bf984e9b4a523e486af1c5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:03: setting system clock to 2017-04-20 07:24:13 UTC (1492673053)
Freeing unused kernel memory: 1684k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
HP HPSA Driver (v 3.4.14-0-RH1)
hpsa 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
hpsa 0000:02:00.0: MSI-X capable controller
hpsa 0000:02:00.0: irq 27 for MSI/MSI-X
hpsa 0000:02:00.0: irq 28 for MSI/MSI-X
hpsa 0000:02:00.0: irq 29 for MSI/MSI-X
hpsa 0000:02:00.0: irq 30 for MSI/MSI-X
hpsa 0000:02:00.0: irq 31 for MSI/MSI-X
hpsa 0000:02:00.0: irq 32 for MSI/MSI-X
hpsa 0000:02:00.0: irq 33 for MSI/MSI-X
hpsa 0000:02:00.0: irq 34 for MSI/MSI-X
hpsa 0000:02:00.0: irq 35 for MSI/MSI-X
hpsa 0000:02:00.0: irq 36 for MSI/MSI-X
hpsa 0000:02:00.0: irq 37 for MSI/MSI-X
hpsa 0000:02:00.0: irq 38 for MSI/MSI-X
hpsa 0000:02:00.0: irq 39 for MSI/MSI-X
hpsa 0000:02:00.0: irq 40 for MSI/MSI-X
hpsa 0000:02:00.0: irq 41 for MSI/MSI-X
hpsa 0000:02:00.0: irq 42 for MSI/MSI-X
hpsa 0000:02:00.0: irq 43 for MSI/MSI-X
hpsa 0000:02:00.0: irq 44 for MSI/MSI-X
hpsa 0000:02:00.0: irq 45 for MSI/MSI-X
hpsa 0000:02:00.0: irq 46 for MSI/MSI-X
hpsa 0000:02:00.0: irq 47 for MSI/MSI-X
hpsa 0000:02:00.0: irq 48 for MSI/MSI-X
hpsa 0000:02:00.0: irq 49 for MSI/MSI-X
hpsa 0000:02:00.0: irq 50 for MSI/MSI-X
hpsa 0000:02:00.0: irq 51 for MSI/MSI-X
hpsa 0000:02:00.0: irq 52 for MSI/MSI-X
hpsa 0000:02:00.0: irq 53 for MSI/MSI-X
hpsa 0000:02:00.0: irq 54 for MSI/MSI-X
hpsa 0000:02:00.0: irq 55 for MSI/MSI-X
hpsa 0000:02:00.0: irq 56 for MSI/MSI-X
hpsa 0000:02:00.0: irq 57 for MSI/MSI-X
hpsa 0000:02:00.0: irq 58 for MSI/MSI-X
hpsa 0000:02:00.0: Logical aborts not supported
hpsa 0000:02:00.0: HP SSD Smart Path aborts not supported
tg3.c:v3.137 (May 11, 2014)
[drm] Initialized drm 1.1.0 20060810
scsi host0: hpsa
[TTM] Zone kernel: Available graphics memory: 74168698 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
tg3 0000:03:00.0 eth0: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address ac:16:2d:85:24:4c
tg3 0000:03:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.1 eth1: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address ac:16:2d:85:24:4d
tg3 0000:03:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
fbcon: mgadrmfb (fb0) is primary device
hpsa 0000:02:00.0: scsi 0:0:0:0: added RAID HP P420i controller SSDSmartPathCap- En- Exp=1
hpsa 0000:02:00.0: scsi 0:0:1:0: masked Direct-Access HITACHI HUC106060CSS600 PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:02:00.0: scsi 0:0:2:0: masked Direct-Access HITACHI HUC106060CSS600 PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:02:00.0: scsi 0:0:3:0: masked Direct-Access Pliant LB1606R PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:02:00.0: scsi 0:0:4:0: masked Direct-Access Pliant LB1606R PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:02:00.0: scsi 0:0:5:0: masked Enclosure PMCSIERA SRCv8x6G enclosure SSDSmartPathCap- En- Exp=0
hpsa 0000:02:00.0: scsi 0:1:0:0: added Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
hpsa 0000:02:00.0: scsi 0:1:0:1: added Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
hpsa 0000:02:00.0: scsi 0:1:0:2: added Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
hpsa 0000:02:00.0: scsi 0:1:0:3: added Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
scsi 0:0:0:0: RAID HP P420i 8.00 PQ: 0 ANSI: 5
usb 1-1.4: new low-speed USB device number 3 using ehci-pci
usb 2-1.3: new high-speed USB device number 3 using ehci-pci
scsi 0:1:0:0: Direct-Access HP LOGICAL VOLUME 8.00 PQ: 0 ANSI: 5
tg3 0000:03:00.2 eth2: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address ac:16:2d:85:24:4e
tg3 0000:03:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.2 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
usb 1-1.4: New USB device found, idVendor=046d, idProduct=c31c
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB Keyboard
usb 1-1.4: Manufacturer: Logitech
usb 2-1.3: New USB device found, idVendor=0424, idProduct=2660
usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 2 ports detected
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input1
tg3 0000:03:00.3 eth3: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address ac:16:2d:85:24:4f
tg3 0000:03:00.3 eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.3 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.3 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
Console: switching to colour frame buffer device 200x56
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input1
tsc: Refined TSC clocksource calibration: 2593.709 MHz
mgag200 0000:01:00.1: fb0: mgadrmfb frame buffer device
Switched to clocksource tsc
scsi 0:1:0:1: Direct-Access HP LOGICAL VOLUME 8.00 PQ: 0 ANSI: 5
usb 1-1.5: new low-speed USB device number 4 using ehci-pci
[drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.1 on minor 0
usb 1-1.5: New USB device found, idVendor=046d, idProduct=c05b
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: USB Optical Mouse
usb 1-1.5: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input3
hid-generic 0003:046D:C05B.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.5/input0
scsi 0:1:0:2: Direct-Access HP LOGICAL VOLUME 8.00 PQ: 0 ANSI: 5
scsi 0:1:0:3: Direct-Access HP LOGICAL VOLUME 8.00 PQ: 0 ANSI: 5
sd 0:1:0:0: [sda] 1172058032 512-byte logical blocks: (600 GB/558 GiB)
sd 0:1:0:1: [sdb] 2726299647 512-byte logical blocks: (1.39 TB/1.26 TiB)
sd 0:1:0:2: [sdc] 2831157247 512-byte logical blocks: (1.44 TB/1.31 TiB)
sd 0:1:0:0: [sda] Write Protect is off
sd 0:1:0:0: [sda] Mode Sense: 73 00 00 08
sd 0:1:0:3: [sdd] 1172055984 512-byte logical blocks: (600 GB/558 GiB)
sd 0:1:0:1: [sdb] Write Protect is off
sd 0:1:0:1: [sdb] Mode Sense: 73 00 00 08
sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:1:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:1:0:3: [sdd] Write Protect is off
sd 0:1:0:3: [sdd] Mode Sense: 73 00 00 08
sd 0:1:0:2: [sdc] Write Protect is off
sd 0:1:0:2: [sdc] Mode Sense: 73 00 00 08
sd 0:1:0:3: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:1:0:2: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:1:0:1: [sdb] Attached SCSI disk
sd 0:1:0:0: [sda] Attached SCSI disk
sd 0:1:0:3: [sdd] Attached SCSI disk
sd 0:1:0:2: [sdc] Attached SCSI disk
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-0): Mounting V4 Filesystem
XFS (dm-0): Ending clean mount
systemd-journald[253]: Received SIGTERM from PID 1 (systemd).
type=1404 audit(1492673055.471:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 104873 rules.
SELinux: 2048 avtab hash slots, 104873 rules.
SELinux: 8 users, 14 roles, 4981 types, 301 bools, 1 sens, 1024 cats
SELinux: 91 classes, 104873 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
type=1403 audit(1492673055.790:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 322.683ms.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev and /run in 48.855ms.
systemd-journald[692]: Received request to flush runtime journal from PID 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1200 MHz, 2600 MHz
dca service started, version 1.12.1
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:1f:0e.0
EDAC MC1: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#1': DEV 0000:3f:0e.0
EDAC sbridge: Ver: 1.1.1
input: PC Speaker as /devices/platform/pcspkr/input/input4
ipmi message handler version 39.2
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:04.0: irq 62 for MSI/MSI-X
ioatdma 0000:00:04.1: irq 64 for MSI/MSI-X
ioatdma 0000:00:04.2: irq 65 for MSI/MSI-X
ioatdma 0000:00:04.3: irq 66 for MSI/MSI-X
ioatdma 0000:00:04.4: irq 67 for MSI/MSI-X
ioatdma 0000:00:04.5: irq 68 for MSI/MSI-X
ioatdma 0000:00:04.6: irq 69 for MSI/MSI-X
ioatdma 0000:00:04.7: irq 70 for MSI/MSI-X
ioatdma 0000:20:04.0: irq 74 for MSI/MSI-X
ioatdma 0000:20:04.1: irq 76 for MSI/MSI-X
ioatdma 0000:20:04.2: irq 77 for MSI/MSI-X
ioatdma 0000:20:04.3: irq 78 for MSI/MSI-X
ioatdma 0000:20:04.4: irq 79 for MSI/MSI-X
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ioatdma 0000:20:04.5: irq 80 for MSI/MSI-X
ioatdma 0000:20:04.6: irq 81 for MSI/MSI-X
ioatdma 0000:20:04.7: irq 82 for MSI/MSI-X
hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON)
hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: 1.4.0, timer margin: 30 seconds (nowayout=0).
scsi 0:0:0:0: Attached scsi generic sg0 type 12
sd 0:1:0:0: Attached scsi generic sg1 type 0
sd 0:1:0:1: Attached scsi generic sg2 type 0
sd 0:1:0:2: Attached scsi generic sg3 type 0
sd 0:1:0:3: Attached scsi generic sg4 type 0
iTCO_vendor_support: vendor-support=0
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
xor: automatically using best checksumming function:
alg: No test for crc32 (crc32-pclmul)
avx : 18892.000 MB/sec
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
ipmi_si IPI0001:00: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
raid6: sse2x1 gen() 5773 MB/s
raid6: sse2x2 gen() 4453 MB/s
raid6: sse2x4 gen() 7250 MB/s
raid6: using algorithm sse2x4 gen() (7250 MB/s)
raid6: using ssse3x2 recovery algorithm
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
Adding 4194300k swap on /dev/mapper/ol-swap. Priority:-1 extents:1 across:4194300k FS
Btrfs loaded
BTRFS: device fsid 970133db-92a8-4282-a483-90ee8b2920c1 devid 1 transid 11 /dev/sdb
XFS (sda1): Mounting V4 Filesystem
BTRFS info (device sdb): disk space caching is enabled
BTRFS: has skinny extents
BTRFS error (device sdb): bad tree block start 0 147456
BTRFS: failed to read chunk root on sdb
BTRFS: open_ctree failed
XFS (sda1): Ending clean mount
XFS (dm-2): Mounting V4 Filesystem
XFS (dm-2): Ending clean mount
type=1305 audit(1492673060.368:4): audit_pid=1014 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
tg3 0000:03:00.0: irq 83 for MSI/MSI-X
tg3 0000:03:00.0: irq 84 for MSI/MSI-X
tg3 0000:03:00.0: irq 85 for MSI/MSI-X
tg3 0000:03:00.0: irq 86 for MSI/MSI-X
tg3 0000:03:00.0: irq 87 for MSI/MSI-X
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
tg3 0000:03:00.1: irq 88 for MSI/MSI-X
tg3 0000:03:00.1: irq 89 for MSI/MSI-X
tg3 0000:03:00.1: irq 90 for MSI/MSI-X
tg3 0000:03:00.1: irq 91 for MSI/MSI-X
tg3 0000:03:00.1: irq 92 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno3: link is not ready
tg3 0000:03:00.2: irq 93 for MSI/MSI-X
tg3 0000:03:00.2: irq 94 for MSI/MSI-X
tg3 0000:03:00.2: irq 95 for MSI/MSI-X
tg3 0000:03:00.2: irq 96 for MSI/MSI-X
tg3 0000:03:00.2: irq 97 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eno3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno4: link is not ready
tg3 0000:03:00.3: irq 98 for MSI/MSI-X
tg3 0000:03:00.3: irq 99 for MSI/MSI-X
tg3 0000:03:00.3: irq 100 for MSI/MSI-X
tg3 0000:03:00.3: irq 101 for MSI/MSI-X
tg3 0000:03:00.3: irq 102 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eno4: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno4: link is not ready
tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0 eno1: Flow control is on for TX and on for RX
tg3 0000:03:00.0 eno1: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
mgag200 0000:01:00.1: Video card doesn't support cursors with partial transparency.
mgag200 0000:01:00.1: Not enabling hardware cursor.
fuse init (API version 7.22)
spl: loading out-of-tree module taints kernel.
spl: module verification failed: signature and/or required key missing - tainting kernel
SPL: Loaded module v0.6.5.9-1
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.6.5.9-1, ZFS pool version 5000, ZFS filesystem version 5
sdc: sdc1 sdc9
sdc: sdc1 sdc9
sdc: sdc1 sdc9
SPL: using hostid 0x00000000
perf: interrupt took too long (2533 > 2500), lowering kernel.perf_event_max_sample_rate to 78000
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #8: block 170426483: comm jbd2/sdb-8: lblock 115 mapped to illegal pblock (length 1)
jbd2_journal_bmap: journal block not found at offset 115 on sdb-8
Aborting journal on device sdb-8.
EXT4-fs error (device sdb): ext4_journal_check_start:56: Detected aborted journal
EXT4-fs (sdb): Remounting filesystem read-only
perf: interrupt took too long (3306 > 3166), lowering kernel.perf_event_max_sample_rate to 60000
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm gvfs-udisks2-vo: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm gvfs-udisks2-vo: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm gvfs-udisks2-vo: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm gvfs-udisks2-vo: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm gvfs-udisks2-vo: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm gvfs-udisks2-vo: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm gvfs-udisks2-vo: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm gvfs-udisks2-vo: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm gvfs-udisks2-vo: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm gvfs-udisks2-vo: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
EXT4-fs error: 11 callbacks suppressed
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs warning: 11 callbacks suppressed
EXT4-fs warning (device sdb): __ext4_read_dirblock:902: error reading directory block (ino 2, block 0)
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
perf: interrupt took too long (4252 > 4132), lowering kernel.perf_event_max_sample_rate to 47000
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
attempt to access beyond end of device
sdb: rw=0, want=2726299648, limit=2726299647
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
perf: interrupt took too long (5320 > 5315), lowering kernel.perf_event_max_sample_rate to 37000
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm sftp-server: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm sftp-server: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
perf: interrupt took too long (6651 > 6650), lowering kernel.perf_event_max_sample_rate to 30000
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
perf: interrupt took too long (8331 > 8313), lowering kernel.perf_event_max_sample_rate to 24000
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm sftp-server: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm sftp-server: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm ls: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm ls: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm sysbench: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm sysbench: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
XFS (sdd): Mounting V4 Filesystem
XFS (sdd): Ending clean mount
EXT4-fs error (device sdb): ext4_map_blocks:560: inode #2: block 9428: comm pool: lblock 0 mapped to illegal pblock (length 1)
EXT4-fs error (device sdb): ext4_readdir:172: inode #2: comm pool: path /mnt/sdb: directory contains a hole at offset 0
EXT4-fs error (device sdb): ext4_put_super:789: Couldn't clean up the journal
BTRFS: device fsid 7943095b-4e81-447c-be72-0070a89c0f95 devid 1 transid 3 /dev/sdb
BTRFS info (device sdb): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: flagging fs with big metadata feature
BTRFS: detected SSD devices, enabling SSD mode
BTRFS info (device sdb): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: detected SSD devices, enabling SSD mode
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
python (39597): drop_caches: 3
python (39597): drop_caches: 3
python (39696): drop_caches: 3
python (39696): drop_caches: 3
python (39784): drop_caches: 3
python (39784): drop_caches: 3
TCP: lp registered
perf: interrupt took too long (10417 > 10413), lowering kernel.perf_event_max_sample_rate to 19000
python (8997): drop_caches: 3
python (8997): drop_caches: 3
python (9091): drop_caches: 3
python (9091): drop_caches: 3
python (9130): drop_caches: 3
python (9130): drop_caches: 3
python (49125): drop_caches: 3
python (49125): drop_caches: 3
python (49142): drop_caches: 3
python (49142): drop_caches: 3
python (49167): drop_caches: 3
python (49167): drop_caches: 3